After a period of operation, the screw host will have the following problems:

1. Turn on the air dryer first, then press the start button of the air compressor, the air compressor starts to unload and run, and the automatic operation indicator light is on.

2. After 10 seconds, the air compressor starts to switch to loading, and the display information on the display screen changes from automatic unloading to loading operation.

3. The air compressor and cold dryer are manually drained and the sundries in the unit are discharged.

4. Debug according to the operating pressure to the specified pressure range, and improve other debugging operating parameters.

5. Fill in the operation record form and record various parameters and related contents.

6. After running for 10 minutes, manually drain the bottom of the gas storage tank.

7. Normal startup, loading and unloading for half an hour to 1 hour, turn off the air compressor and the cold dryer button.

8. The boot is over.

Sollant Group-Professional Compressed Gas Solutions Provider