The harm of fake lubricating oil to air compressor
- Fake engine oil cannot help heat dissipation, and it is easy to cause the engine temperature to be too high
Engine oil has a low specific heat capacity and does not have a cooling effect by itself. But when the engine is working, the combustion of fuel will generate a lot of heat energy, which requires the oil to be able to bring the heat back to the fuel tank and then dissipate it. Fake engine oil is difficult to help heat dissipation, and it is easy to cause dry friction and cause excessive engine temperature.
- Fake engine oil has poor cleaning performance and cannot clean the engine
Good engine oil can circulate carbides, sludge, and worn metal particles on engine parts back to the oil tank through flow. However, the cleaning performance of fake engine oil is poor. If you use fake engine oil, you will find that the engine is prone to carbon deposits, sludge and other dirt.
- Fake engine oil has poor sealing performance, resulting in cylinder pressure leakage, increasing fuel consumption and emissions
Engine oil can form a “sealing ring” between the piston ring and the cylinder wall to reduce gas leakage and ensure sufficient pressure in the cylinder. Fake engine oil does not have this effect. Therefore, the use of fake engine oil can easily lead to cylinder pressure leakage. At this time, the engine cannot output enough power, which will cause a series of problems such as higher fuel consumption, increased emissions, and excessive oil consumption.
- Fake engine oil has poor rust resistance and accelerates the corrosion of metal parts
Lubricating oil can adhere to the surface of parts to prevent water, air, acidic substances and harmful gases from contacting the parts. However, fake engine oil has poor adhesion, so it will accelerate the oxidation of metal parts and cause serious corrosion.
- Fake engine oil has poor lubricating ability and cannot buffer the impact load
When the engine cylinder port pressure rises sharply, the load on the piston, piston bits, connecting rod and crankshaft bearing will become very large, but the load can be reasonably buffered through the transmission lubrication of the bearing. Fake engine oil has poor lubricating ability, which makes it difficult for it to buffer such loads, and over time, it will cause mechanical failure. In short, the use of fake engine oil can cause frequent failures, or burn the cylinders and burn tiles. Save a little fuel money for maintenance, resulting in shortened engine life or even early scrapping. So use genuine engine oil.
The use of original air compressor oil is guaranteed：
do you know? Original engine oil is developed for engine technology. It has more stable viscosity characteristics, effectively reduces oil consumption and provides effective protection for the engine; more excellent cold start performance, reduces friction and reduces fuel consumption; outstanding power cleaning technology keeps the engine clean and effectively prolongs engine life.
Sollant Focus on Energy Saving
