Leading Hydrogen Compressor Manufacturer
Our expertise in hydrogen compression technology makes us a leading supplier with many years of production and R&D experience.
Hydrogen Diaphragm Compressor Technology
Features
Good sealing performance:
Diaphragm compressor is a special structure positive displacement compressor. The gas does not need lubrication and has good sealing performance. The compressed medium does not come into contact with any lubricant and does not produce any pollution during the compression process. It is especially suitable for high purity (99.9999 % or more), compression, transportation and filling of precious and rare, extremely corrosive, toxic and harmful, flammable and explosive, radioactive gases.
The cylinder has good heat dissipation performance:
The working cylinder of the diaphragm compressor has good heat dissipation performance and is close to isothermal compression. It can use a higher compression ratio and is suitable for compressing high-pressure gas.
Technical advantages
- The diaphragm compressor has low rotation speed and extends the service life of wearing parts. The new membrane cavity curve improves the volumetric efficiency of the compressor and optimizes the valve adjustment. The diaphragm adopts a special heat treatment method, which greatly improves the service life.
- The use of a high-efficiency cooler ensures low temperature and high efficiency of the entire machine, which can appropriately extend the life of lubricating oil, O-rings, and valve springs. Under the condition that the process parameters are met, the structure is more advanced, reasonable and energy-saving.
- The membrane head is sealed with inlaid double O-rings, and its sealing effect is far better than that of the open membrane head.
- The diaphragm rupture alarm structure is advanced, reasonable and reliable. The diaphragm has no direction when installed and is easy to replace.
Selection of Diaphragm Compressors
Structural form: D type, symmetrically balanced type
Piston stroke: 130mm～210mm
Maximum piston force: 40KN～160KN
Maximum exhaust pressure: 100MPa
Flow range: 30～2000Nm³/h
Motor power: 22KW～200KW
Crankshaft speed: 420rpm
Cooling method: water cooling/air cooling (optional)
Structural form: L Type
Piston stroke: 110mm～180mm
Maximum piston force: 20KN～40KN
Maximum exhaust pressure: 100MPa
Flow range: 10～1000Nm³/h
Motor power: 7.5KW～90KW
Crankshaft speed: 420rpm
Cooling method: water cooling/air cooling (optional)
Structural form: V Type
Piston stroke: 70mm～130mm
Maximum piston force: 10KN～30KN
Maximum exhaust pressure: 50MPa
Flow range: 2～200Nm³/h
Motor power: 2.2KW～30KW
Crankshaft speed: 420rpm
Cooling method: water cooling/air cooling (optional)
Structural form: Z type
Piston stroke: 70mm~180mm
Maximum piston force: 10KN～90KN
Maximum exhaust pressure: 70MPa
Flow range: 0.5～500Nm³/h
Motor power: 2.2KW～55KW
Crankshaft speed: 420rpm
Cooling method: water cooling/air cooling (optional)
